Home

The LT1101 chip is a single-port GPON OLT MAC chip, recommended for application scenarios such as Fiber to the Room (FTTR) or Passive Optical LAN (POL) in all-optical campus/enterprise networks.

The LT1103 chip is a single-port GPON OLT MAC chip, suitable for application scenarios such as Fiber to the Home (FTTH) and high-splitting-ratio all-optical campus/enterprise networks (POL).

The LT1301 chip is a single-port OLT MAC chip that can be flexibly configured as GPON, XG-PON, or XGS-PON. It is primarily suitable for application scenarios such as passive optical local area networks/enterprise networks (POL) or high-bandwidth fiber-to-the-room (FTTR).

The LT1604 chip is a single-port XGS-MPM (Combo) OLT MAC chip that supports the coexistence of ONUs in three modes—GPON, XG-PON, and XGS-PON—on the same ODN, primarily suitable for application scenarios such as Fiber to the Home (FTTH).

Addressing requirement of replacing electrical switching by optical switching in all-optical networks, and solving the bottleneck of key components for core network equipment such as OXC and ROADM in optical transmission networks.

Addressing requirement of replacing electrical switching by optical switching in all-optical networks, and solving the bottleneck of key components for core network equipment such as OXC and ROADM in optical transmission networks.

3dB bandwidth: >5 GHz
Wavelength: 1310nm or 1490nm

3dB bandwidth: >12 GHz
Wavelength: 1270 nm or 1577 nm

3dB bandwidth: >18GHz  
Wavelength: 1310 nm, CWDM, LWDM

Minimum output power: 70/100 mW  
Center Wavelength: 1310 nm/O-band CWDM/

STICK-OLT is an innovative architecture for optoelectronic module products. It integrates optical-electrical conversion, MAC link layer of PON OLT, scheduling and control, and other port-level system functions within a compact SFP/+ optical module. The module adopts an SC/UPC optical interface and, when combined with Ethernet switching and routing product platforms, forms a variety of OLT equipment such as large/medium/small capacity devices and Remote-OLT products tailored for carrier or campus/enterprise network scenarios.

STICK-OLT is an innovative architecture for optoelectronic module products. It integrates port-based system-level functions such as photoelectric conversion, PON OLT MAC, communication scheduling, and control within a compact SFP/+ optical module. The module's electrical and optical interfaces are fully compatible with Ethernet optical modules, enabling deployment in Ethernet core switches, aggregation switches, routers, ACs, and other devices. This allows flexible, on-demand selection of PON or Ethernet connectivity and networking capabilities. This solution leverages the respective technical advantages of point-to-point (P2P) optical Ethernet and point-to-multipoint (P2MP) PON, significantly reducing costs for network equipment, construction, management, and maintenance. It empowers partners to build a platform-based, converged, and future-oriented all-optical network for campuses or enterprises.

STICK-ONU is a PON ONU product in the form of an SFP/+ optical module. It integrates complete ONU functionalities including optical-electrical conversion, PON ONU MAC, service scheduling, and remote management. It supports various types such as GPON, XGPON, and XGS-PON, along with SC/UPC or SC/APC optical interfaces. It enables xPON uplink networking in products like access switches, WiFi APs, mobile base stations, and surveillance cameras.

STICK-ONU is an SFP/+ optical module form factor PON ONU product. It integrates complete ONU functionalities including optical-electrical conversion, PON ONU MAC, service scheduling, and remote management. Equipped with LC/UPC optical interfaces, it supports optional types such as GPON, XGPON, and XGS-PON. It enables xPON uplink networking in devices like access switches, WiFi APs, mobile base stations, and surveillance cameras. Equipment manufacturers or solution providers can collaborate with our STICK-OLT LC optical interface product series to build a platform-based, converged, and future-oriented new-generation all-optical network for campuses/enterprises.

The Mini-OLT is a compact, card-shaped OLT module that integrates complete PON-OLT electro-optical conversion and MAC functionalities. It is primarily designed for applications such as compact OLT equipment and Fiber to the Room (FTTR-B, -H) scenarios.

The GPON OLT optical module adopts standardized interfaces and is well compatible with various MAC chips and mainstream devices.

The XG/S-PON OLT optical module is well compatible with various MAC chips and mainstream devices. It boasts advantages such as high optical power budget, low power consumption, and reliability and stability.

The XG/S-MPM(Combo) PON OLT optical module is well compatible with various MAC chips and mainstream devices. It boasts advantages such as high optical power budget, low power consumption, and reliability and stability.

Mainly includes 100G CWDM4/LR4, 40G LR4/SR4, 25G LR, etc.
Excellent compatibility and wide applicability.

A full range of optical modules for 5G front-haul, including 10G CWDM,25G CWDM /MWDM/LWDM, 25GBIDI, etc. 50G and 100G optical modules for 5G mid-haul and backhaul networks

Suitable for XGS-PON terminals (BOB)
Support Class N1 and N2